36kV Polymer Pin Insulator

36kV Polymer Pin Insulator

Polymer Insulator Introduction:

Insulator epoxy composite have very high resistance to bending, shock resistance, shock resistance and explosion-proof performance. The internal insulation is very reliable and lightweight, making it an ideal replacement for traditional toughened glass insulators.

The composite insulator is composed of a core rod made of epoxy glass fiber rod and silicon rubber as the basic insulator. The mechanical strength of epoxy glass fiber rod is quite high, which is 1.6 to 2.0 times that of ordinary steel. It is high-strength porcelain. 3 to 5 times. The three-layer silicone rubber insulating umbrella skirt has good anti-pollution flashover performance, and will not have cracks, breakage, and enamel falling off. Because the diameter of the silicone rubber umbrella skirt in the middle layer is smaller than the diameter of the insulating umbrella skirt in the upper and lower layers, the insulating umbrella skirt in the upper and lower layers will not form a continuous conductive film, and will not generate the thermal effect of leakage current. It is difficult to cause insulator flashover.

Type	Rated Voltage kV	Specified Mechanical Load kN	Section Length mm	Min Arc Distance mm	Leakage Distance mm	Lightning Impulse Withstand BIL kV	Power Frequency Withstand Wet kV
FPQ-36/12.5	36	12.5	545	405	1650	250	135

Our Services

1. Small orders accepted
2. Fast producing time, prompt delivery
3. International approvals
4. Reply promptly in 24 hours
5. Best price

FAQ

1. Q: How about payment terms ?
A: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment can be negotiated.
2. Q: Do you have some videos where we can see the line producing ?
A: Yes, we can provide some videos for reference.
3. Q: Are you a Manufacture Factory ?
A: Yes. We are the direct manufacture factory, and our factory has specialized in porcelain insulator, composite insulator, arrester, cut out fuse, abc cable fitting, power fitting, etc.
4. Q: How long is producing time ?
A: Normally it will take about 30 days for production.
5. Q: What is the standard of package ?
A: For small capacity, we use carton, but for big capacity, we will use strong wooden case for protection or double inner packs in a master carton.
6. Q: How do you make sure your good quality ?

A: We use the best raw material, and every single product will go through a series of strict test.

We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.

Contact us if you need more details on Polymer Insulator Polymer Insulator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Insulator Epoxy Composite、Polymer Insulator Introduction. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Composite Insulator > Pin Type Composite Insulator